888-388-7808

IPC Standards and Training Slides and Posters


Practical Components is an authorized distributor of IPC materials. IPC is a nonprofit organization dedicated to the printed circuit board fabrication and electronics assembly industry, with a focus on technology enhancement programs, the creation of relevant standards, protection of the environment, and pertinent government relations. All IPC materials are developed and approved by trainers and other experts to insure technical accuracy and consensus of standards within the industry.

All Practical Components training kits meet the relevant IPC standards and make ideal companions to your training program. Practical’s knowledgeable sales professionals have all the information you need to take your processes and training into the 21st century.

Listed below is a representative sample of our most requested IPC slides and posters. If you don’t see the title you need or you need an update of newly released available products, please contact us.

IPC SLIDE SETS IPC Slides

SURFACE MOUNT SOLDER JOINT EVALUATION, PART 1: INTRODUCTION—SLIDE SET

Contains 110 35mm slides used in Part 1 of Surface Mount Solder Joint Evaluation (VT-71). Includes graphics and microphotographs of all types of surface mount solder joints. These slides may be used to analyze the contents of the videotape, define your company’s specific acceptance criteria, or enhance your existing visual training programs. For internal use only. Images are not licensed for use in products intended for resale.

IPC-VT-71-SS

SURFACE MOUNT SOLDER JOINT EVALUATION, PART 2: RECTANGULAR CHIP COMPONENTS—SLIDE SET

Contains 116 35mm slides used in Part 2 of Surface Mount Solder Joint Evaluation (VT-72). Includes graphics and microphotographs of rectangular chip component solder joints. For internal use only. Images are not licensed for use in products intended for resale.

IPC-VT-72-SS

SURFACE MOUNT SOLDER JOINT EVALUATION, PART 3: BOTTOM-ONLY & MELFS—SLIDE SET

Contains 114 35mm slides used in Part 3 of Surface Mount Solder Joint Evaluation (VT-73). Includes graphics and microphotographs of bottom-only and MELF surface mount chip components. For internal use only. Images are not licensed for use in products intended for resale.

IPC-VT-73-SS 

SURFACE MOUNT SOLDER JOINT EVALUATION, PART 4: GULL WING COMPONENTS—SLIDE SET

Contains 106 35mm slides used in Part 4 of Surface Mount Solder Joint Evaluation (VT-74). Includes graphics and microphotographs of gull wing surface mount chip components. For internal use only. Images are not licensed for use in products intended for resale.

IPC-VT-74-SS

SURFACE MOUNT SOLDER JOINT EVALUATION, PART 5: J-LEAD COMPONENTS—SLIDE SET

Contains 100 35mm slides used in Part 5 of Surface Mount Solder Joint Evaluation (VT-75). Includes graphics and microphotographs of J-Lead surface mount components/solder joints. For internal use only. Images are not licensed for use in products intended for resale.

IPC-VT-75-SS

IPC WALL POSTERS IPC Posters

SURFACE MOUNT EVALUATION—POSTER

What better way to demonstrate to your employees that “Inspection is Everyone’s Job” than our new IPC Surface Mount Evaluation Wall Posters! Utilizing the graphics and acceptability criteria from the Desk Reference Manual, these 20x20 inch hanging posters serve as a constant reminder that quality is job #1. Our 8.5x11 inch Inspection Sheets make a convenient reference guide for any employee to keep in their personal “Quality Control” binders. 20x28 inch Surface Mount Evaluation / Inspection Posters for Class 2 and Class 3 come laminated with eyelets for hanging.

One 20 x 28 inch poster (each class) for Chips, Gulls and J-Leads
IPC-P-SMTL-2 (Class 2, set of 3 posters) 
IPC-P-SMTL-3 (Class 3, set of 3 posters) 

One 8.5 x 11 inch Evaluation / Inspection Sheet(each class) for Chips, Gulls and J-Leads
IPC-P-SMTS-2 (Class 2, Set of 3)
IPC-P-SMTS-3 (Class 3, Set of 3

THROUGH-HOLE EVALUATION—POSTER

Full-color 20x28 inch laminated posters visually define minimum / maximum through-hole solder joint acceptability requirements to IPC-A-610C in high quality 3-D graphics. These posters depict complex through-hole solder joint requirements so clearly that all operators and inspectors can easily understand and apply the criteria. Bring technically accurate, industry consensus acceptability standards to your training room or inspection area. IPC through-hole posters come with corner eyelets for easy hanging, and are also available in a reduced size to fit into 3-ring binders, or for posting near each inspector. These “inspection sheets” measure 8.5 x 11 inch and are also full-color and fully laminated.

20" x 28" IPC-PTHL-2 Class 2 Poster
20" x 28" IPC-PTHL-3 Class 3 Poster
8.5" x 11" IPC-PTHS-2 Class 2 Insp. Sheet
8.5" x 11" IPC-PTHS-3 Class 3 Insp. Sheet

 



IPC Validation Services

New Product

.4mm Pitch eWLP Dummy Wafer-Amkor
.4mm Pitch eWLP Dummy Wafer-Amkor

Walts

Technical Center

In the News

Practical Components’ Publishes New 2017 Product Catalog
This catalog marks a major revision to the Practical Components catalog. Inside you will find over 20 pages of new products and for the first time much of it is printed ... [read more]

Request Catalog

Catalog

Request or download our catalog and sign-up for our newsletter.

Continue